120mm Diameter Platform, Motorized Rotation Stages with Rotary Encoder, 2-Phase Stepper Motor, 1/4-20 Thread
OSMS(RE)-120YAW-INCH-M2
Based on our CE-compliant OSMS-YAW Series Rotation Motorized Stages, these models are equipped with a 2-phase stepping motor and rotary encoder.
A rotary encoder built into the motor enables "Step-out detection" with a dedicated controller.
The product is equipped with a "2-phase bipolar stepping motor". Specifications are basically equivalent to those of OSMS-YAW Series Rotation Motorized Stages with 5-phase motors. The product body is the same for the METRIC and INCH type stages. METRIC and INCH types are available for mounting on the table for each size. The "step-out detection function" of the dedicated controller can be used.
Name | 120mm Diameter Platform, Motorized Rotation Stages with Rotary Encoder, 2-Phase Stepper Motor, 1/4-20 Thread |
---|---|
Weight | 2.1000kgs |
Guide |
|
Attention |
|
Load Capacity | 196N (20.0kg) |
Mounting Thread | 1/4-20UNC |
Rotation Range | Continuous 360 Degrees in CW and CCW |
Stage Size | φ120mm |
Travel Mechanism (reduction ratio) | Worm gear (1:144) |
Positioning Slide | Crossed roller |
Stage Material | Aluminium and Aluminum bronze |
Resolution (Full) | 0.005 deg./pulse |
Resolution (Half) | 0.0025 deg./pulse |
Minimum Incremental Motion (refurence) | 0.5mdeg |
MAX Speed | 30 deg./sec |
Positioning Accuracy | 0.1 deg. |
Positional Repeatability | 0.02 deg. |
Load Capacity | 196N(20.0kgf) |
Moment Stiffness | 0.1arcsec/N-cm |
Lost Motion | 0.05 deg. |
Backlash | 0.08 deg. |
Parallelism | 50um |
Concentricity | 30um |
Wobble | 0.02mm |
Sensor Part Number | Micro photo sensor : PM-F25(SUNX Co., Ltd.) |
Limit Sensor | Equipped (NORMAL CLOSE) |
Origin Sensor | None |
Proximity Origin Sensor | None |
Encoder Resolution | 500 Pulses/Rev. |
Step Angle | 1.8 deg. |
Stepping Motor Type | 2-phase stepping motor 1.2A/phase |
In stock
SKU
OSMS(RE)-120YAW-INCH-M2
£2,849.30
Based on our CE-compliant OSMS-YAW Series Rotation Motorized Stages, these models are equipped with a 2-phase stepping motor and rotary encoder.
A rotary encoder built into the motor enables "Step-out detection" with a dedicated controller.