Vertical Control Gimballed Beamsplitter Holder with Knobs for 50.8mm Optic
BSHL-50.8-2
×
These vertical holders are ideal for small spacers due to their thin design and vertical adjustment. Holders can be positioned close to each other reducing optical system size.
◦There are two types, one is fitted with knobs on top (BSHL-2), and the other is without knobs and adjusted by hex wrench (BSHL-TF).
◦This product provides large clear aperture of transmitted beam even if beamsplitter is placed at 45 degrees.
◦The gimbal design maintains the center position of mirror even when fine adjusted.
◦Adjustment screws can be fixed with the clamp screws on the back of the mounts.
◦Two M4 mounting holes are also provided on both sides to mount the holder horizontally.
◦This product provides large clear aperture of transmitted beam even if beamsplitter is placed at 45 degrees.
◦The gimbal design maintains the center position of mirror even when fine adjusted.
◦Adjustment screws can be fixed with the clamp screws on the back of the mounts.
◦Two M4 mounting holes are also provided on both sides to mount the holder horizontally.
Name | Vertical Control Gimballed Beamsplitter Holder with Knobs for 50.8mm Optic |
---|---|
Weight | 0.4800lbs |
Guide |
|
Attention |
|
Image Label | Vertical Control Gimballed Beamsplitter Holder with Knobs for 50.8mm Optic |
Diameter | 50.8mm |
Knobs | With Knobs |
Compatible Optics Diameter | φ50.8mm |
Compatible Optics Thickness | 5 - 8mm |
45° Incidence Reflected Beam Diameter | φ31mm |
45° Incidence Central Transmission Beam Diameter | φ28.10mm |
Fine-Adjustment Range /Tilt | ±1.5° |
Fine-Adjustment Range /Rotation | ±1.5° |
Fine Adjustment Resolution /Tilt | 0.23°/rotation |
Fine Adjustment Resolution /Rotation | 0.27°/rotation |
In stock
SKU
BSHL-50.8-2
SGD 384.10
These vertical holders are ideal for small spacers due to their thin design and vertical adjustment. Holders can be positioned close to each other reducing optical system size.