Precision Polished Aspheric Lens 10mm Diameter 8mm Focal Length 780nm 0.1um

AGL-10-GA-08P

These precision polished aspheric lenses can condense the collimated light into the range of diffraction limited. These lenses are ideally suited for collimating the LD emitted light or focusing the collimated light into the optical fiber.
◦High numerical apertures for effective light condensing.
◦Surface irregularity of convex surface is less than 0.1μm for AGL-EA/AGL-GA series and less than 0.5μm for AGL-EB/ AGL-GB series.
More Information
Name Precision Polished Aspheric Lens 10mm Diameter 8mm Focal Length 780nm 0.1um
Weight 0.0200lbs
Standard Coatings Available No
Guide
  • High precision polished aspheric lens with anti-reflection coating on are available upon request.
  • To mount the high precision polished aspheric lenses, fixed lens holders (LHF-S, LHA) are available.
  • WEB Reference Catalog Code/W4015, WEB Reference Catalog Code/W4020
  • Contact our Sales Division with your request for custom focal length, diameter and NA not listed on our website or in the catalog.
Remark -
Attention
  • There is a direction to put a light in the High precision polished aspheric lens. Please make sure to put the incident parallel light from the convex side.
  • If it reversed, the spherical aberration is deteriorated and the focused spot becomes large.
  • If the light other than the design wavelength is focused, the focal spot may not reach a diffraction limit due to a residual aberration.
  • Since a high precision polished aspheric lens is not chromatically corrected, the focal length (back focal length) will change depending on the wavelength.
  • Since there is no anti-reflection coating on the lens, by the reflection loss of the front surface and the back surface, the transmittance is 90% or less.
Diameter φD 10mm
Focal length 8mm
Material S-LAH64
Material S-LAH64
Refractive Index 1.792 (546.1nm), 1.777 (780nm)
Abbe number ν<sub>d</sub> 47.37
Rear surface form Plano
Centration <3′
Coating Uncoated
Clear aperture 90% of the diameter
Surface Quality (Scratch-Dig) 60-40
Design wavelength 780nm
Diameter φD φ10mm
Focal length f 8mm
Back focal length fb 5.89mm
NA 0.54
Edge thickness te 1.76mm
Center thickness tc 3.9mm
Surface irregularity of convex surface <0.1μm
In stock
SKU
AGL-10-GA-08P
SGD 342.70

Delivery in : 1-3 weeks

These precision polished aspheric lenses can condense the collimated light into the range of diffraction limited. These lenses are ideally suited for collimating the LD emitted light or focusing the collimated light into the optical fiber.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

SINGAPORE

Redirection to :