Glan Taylor Prism 300 - 700nm 6mm Aperture
GYPB-06-15SN-3/7
The transmission loss is minimal, and a high extinction ratio below 5×10-5 is obtained. The Calcite type that can be used in the visible to the infrared region, and α-BBO crystal type usable in the ultraviolet region are available. The polarizer provides a very short prism length.
◦The two prisms are mounted with a small gap (air-gap) to eliminate the adhesive and reduce laser damage.
◦A single-layer anti-reflection coating has been applied on the surface of the polarizing prism to provide high transmittance.
◦A single-layer anti-reflection coating has been applied on the surface of the polarizing prism to provide high transmittance.
| Name | Glan Taylor Prism 300 - 700nm 6mm Aperture |
|---|---|
| Weight | 0.0060lbs |
| Standard Coatings Available | No |
| Guide |
|
| Remark | - |
| Attention |
|
| Image Label | Glan Taylor Prism 300 - 700nm 6mm Aperture |
| Material | α-BBO , Calcite |
| Angular deviation of beam | ＜3′ |
| Transmitted wavefront distortion | λ/4 |
| Coating | Both surfaces ; MgF2 single-layer antireflection coating |
| Laser Damage Threshold | 1J/cm2 (Laser pulse width ; 10ns ) |
| Surface Quality (Scratch-Dig) | 20-10 |
| Wavelength Range | 300 - 700nm |
| Extinction ratio | ＜5×10-6 |
| φA | φ6mm |
| φD×L | 15×15mm |
In stock
SKU
GYPB-06-15SN-3/7
SGD 731.70
Customize product
The transmission loss is minimal, and a high extinction ratio below 5×10-5 is obtained. The Calcite type that can be used in the visible to the infrared region, and α-BBO crystal type usable in the ultraviolet region are available. The polarizer provides a very short prism length.
Resources & Downloads
Related Products
Check items to add to the cart or
