50mW UV and Visible Photodiode Sensor, 9.5-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PMP50-UVIS-9.5D
The Opto Sigma PMP50-UVIS-9.5D is a photodiode sensor designed for measuring power of laser or light sources in the UV and visible ranges. It can read power levels up to 50 mW with 100nW resolution. The PMP50-UVIS-9.5D has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
-
| Name | 50mW UV and Visible Photodiode Sensor, 9.5-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller |
|---|---|
| Weight | 0.1000lbs |
| Guide | - |
| Attention | - |
| Calibration Wavelength Range | 200 - 1100 nm |
| Detector Type | Silicon |
| Power Calibration Uncertainty | +/- 5% at 200-400nm, +/-3% at 400-1000nm, +/-5% at 1000-1100nm |
| Maximum Power Density | 20W/cm2 |
| Power Resolution | 0.1mW |
| Power Linearity | +/-2% |
| Noise Equivalent Power (NEP) | 0.01mW |
| Cooling | Convection |
| Response Time (0-90%) | 0.25s |
| Interface | DB15 |
In stock
SKU
PMP50-UVIS-9.5D
Customize product
The Opto Sigma PMP50-UVIS-9.5D is a photodiode sensor designed for measuring power of laser or light sources in the UV and visible ranges. It can read power levels up to 50 mW with 100nW resolution. The PMP50-UVIS-9.5D has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
Related Products
Check items to add to the cart or
