25X25mm Piezo Assist Z-Axis Stage (Vertical Platform/Horizontal Base) Right Hand Adjuster +/-3mm M2 Threads
TADC-253RLPA
Z-axis stage with Z bracket that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that require high resolution position adjustment.
Stage sizes 25x25, 40x40, 60x60, and 65x65mm are available.
See the Left Handed version of this product
◦A dedicated controller for the piezo assist stage easily perform fine adjustment without any setting. The fine adjustment of the dial type knob can be used without resistance even in combination with a micrometer head.
| Name | 25X25mm Piezo Assist Z-Axis Stage (Vertical Platform/Horizontal Base) Right Hand Adjuster +/-3mm M2 Threads |
|---|---|
| Weight | 0.1000lbs |
| Guide | ▶Use the piezo assist controller (PASC) to adjust the fine movement mechanism. A piezo assist controller connection cable (2m) is included with the piezo assist stage. |
| Attention |
▶When installing the stage, be careful not to give a shock to the micrometer bracket. Otherwise, the piezo assist mechanism may be damaged. ▶ When the power of the piezo assist dedicated controller (PASC) is turned off, the position adjustment of the piezo assist will be changed, and position for fine adjustment will be shifted. |
| Stage Size | 25×25mm |
| Travel | ±3mm |
| Mounting Thread | M2 |
| Stage Size | 25×25mm |
| Travel of Coarse Drive | ±3mm |
| Travel of Fine Drive | >25μm |
| Micrometer Position | Side |
| Lead of Actuator | 0.5mm |
| Micrometer Readable Resolution | 0.01mm |
| Piezo resolution | <20nm |
| Guide Method | Extended Contact Ball Bearing Guide |
| Primary Material | Aluminum |
| Finish | Black anodized |
| Load Capacity | 9.8N（1.0kgf） |
| Travel Accuracy / Straightness | 3μm |
| Max. Moment Capacity / Pitch | 1.47N・m |
| Max. Moment Capacity / Roll | 1.47N・m |
| Moment Stiffness / Pitch | 16.0″/N・cm |
| Running Parallelism | 20μm |
| Weight | 0.1㎏ |
In stock
SKU
TADC-253RLPA
Customize product
Z-axis stage with Z bracket that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that require high resolution position adjustment.
Stage sizes 25x25, 40x40, 60x60, and 65x65mm are available.
Resources & Downloads
Related Products
Check items to add to the cart or
