0.2W Broadband Thermal Sensor, 1 - 200 mJ, 10-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PM02-12D-BB
The Opto Sigma PM02-12D-BB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 0.2W with 10uW resolution. The PM02-12D-BB has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
◦Complete meter less model is very small and performs measurement and analysis with PC.
◦Display connecting model can be used with a lightweight touch screen display in a narrow environment where a PC cannot be installed.
◦Display connecting model can be used with a lightweight touch screen display in a narrow environment where a PC cannot be installed.
Name | 0.2W Broadband Thermal Sensor, 1 - 200 mJ, 10-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller |
---|---|
Weight | 0.2000lbs |
Guide | - |
Attention | - |
Energy Range | 1 mJ - 200 mJ |
Power Range | 0.1 mW - 200 mW |
Wavelength Range | 0.19 - 25µm |
Aperture | 10mm |
Cooling | Convection |
Max Intermittent Power | 200mW |
Power Resolution | 10uW |
Noise Equivalent Power (NEP) | 5uW |
Response Time (0-90%) | 2s |
Power Calibration Uncertainty | +/-3% |
Power Linearity | +/-1% |
Energy Resolution | 10uJ |
Energy Calibration Uncertainty | +/-5% |
Type of Absorber | HPB |
Maximum Power Density | 200W/cm2 |
Max Energy Density | 5ms pulse width: 3.6 J/cm2, 10us pulse width: 0.2 J/cm2, 10ns pulse width: 0.1 J/cm2 |
Interface | DB15 Conector, Compatible with PEM-TS-4.3 Controller |
In stock
SKU
PM02-12D-BB
The Opto Sigma PM02-12D-BB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 0.2W with 10uW resolution. The PM02-12D-BB has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.