Out of stock
SKU
OPBA-OPSQA
OPBA-series flat round mirrors have exceptionally high front-to-back parallelism of less than 2 arcseconds. For reference, the parallelism of a standard mirror is 3 arcminutes or 180 arcseconds, and therefore the OPBA mirrors have 98.8% better parallelism. These mirrors enable highly repeatable and accurate rear-surface mounting.
Customize product
Filters
Enabled filters :
Remove all filters
Attention
▶For aluminum mirrors without a protective film, (TFAN/TFAQN) handle carefully as they can be easily scratched oxidation builds up in the surface. Do not rub the surface with paper or cloth as this will harm the surface. For long term storage, use a de-oxidizer to prevent the oxidation.
▶When a laser light is transmitted with multiple mirrors installed there will be a large amount of light loss due to the absorption of the aluminum coating. Please consider using dielectric multi-layer mirrors (TFM) for improved performance.
▶The reflectance specification are represented by the average of the reflectance of P polarized light and S polarized light. Reflectance may vary depending on the polarization state of the incident beam.
Guide
▶If you need a higher reflectance aluminum mirror, please kindly contact us.
▶Should you require a surface accuracy analysis/data, please kindly contact our sales group.
▶For non-standard sizes other than those listed in the product table, please kindly contact us.
▶Pyrex® is a registered trademark of Corning Inc.
| Name |
Diameter φD
|
Material
|
Protective Coating
|
Parallelism
|
Surface Flatness
|
Delivery | Price | Add to cart | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
details
OPBA-15C05-10
|
15mm | BK7 | Yes | <2'' | λ/10 |
1 week
|
€77.30
|
|
|||||||||||||||||||||
|
details
OPBA-30C05-10
|
30mm | BK7 | Yes | <2'' | λ/10 |
6-12 weeks
|
€116.00
|
|
|||||||||||||||||||||
|
details
OPBA-60C10-10
|
60mm | BK7 | Yes | <2'' | λ/10 |
6-12 weeks
|
€280.30
|
|
|||||||||||||||||||||
|
details
OPSQA-20C05-10
|
20mm | Synthetic fused silica | Yes | <2'' | λ/10 |
6-12 weeks
|
€116.00
|
|
|||||||||||||||||||||
|
details
OPBA-20C05-10
|
20mm | BK7 | Yes | <2'' | λ/10 |
1 week
|
€87.10
|
|
|||||||||||||||||||||
|
details
OPBA-40C06-10
|
40mm | BK7 | Yes | <2'' | λ/10 |
1 week
|
€154.70
|
|
|||||||||||||||||||||
|
details
OPSQA-10C05-10
|
10mm | Synthetic fused silica | Yes | <2'' | λ/10 |
6-12 weeks
|
€96.70
|
|
|||||||||||||||||||||
|
details
OPSQA-25C05-10
|
25mm | Synthetic fused silica | Yes | <2'' | λ/10 |
6-12 weeks
|
€135.30
|
|
|||||||||||||||||||||
|
details
OPBA-10C05-10
|
10mm | BK7 | Yes | <2'' | λ/10 |
1 week
|
€67.70
|
|
|||||||||||||||||||||
|
details
OPBA-25C05-10
|
25mm | BK7 | Yes | <2'' | λ/10 |
1 week
|
€101.40
|
|
|||||||||||||||||||||
|
details
OPBA-50C08-10
|
50mm | BK7 | Yes | <2'' | λ/10 |
1 week
|
€212.60
|
|
|||||||||||||||||||||
|
details
OPSQA-15C05-10
|
15mm | Synthetic fused silica | Yes | <2'' | λ/10 |
6-12 weeks
|
€106.30
|
|
|||||||||||||||||||||
|
details
OPSQA-30C05-10
|
30mm | Synthetic fused silica | Yes | <2'' | λ/10 |
1 week
|
€174.00
|
|
You must be logged in to ask questions
◦With four types to choose from; (TFAN/TFAQN) which is coated with aluminum only, (TFA/TFAQ) which is coated with a protective coating against accidental hard scratches, (TFAE) which is coated aluminum and a protective coating to increase the reflectance of ultraviolet and lastly, (OPBA/OPSQA) which provides Aluminum with protective coat on the optical parallel substrate.
◦For ultraviolet, visible and near-infrared light applications.
◦For low thermal expansion mirrors, we have (TFAQ/TFAQN) which is made of Synthetic fused silica that provides high rigidity and high precision surface quality.
◦For ultraviolet, visible and near-infrared light applications.
◦For low thermal expansion mirrors, we have (TFAQ/TFAQN) which is made of Synthetic fused silica that provides high rigidity and high precision surface quality.
