Daisy-Chain Connecting Cable without Power Feed-thru, for SBIS Series Stages, 1M
HR10HR10-RC-1
Use this cable for connecting a stage with separately supplied power only. It can only transmit commands but not power. Use the other cable, HR10HR10P-RC-1, for Daisy-Chaining commands and power to the next stage, for more than one stage.
When connecting SBIS stages together, power can only be Daisy-Chained for 3 stages. Therefore, starting at the 4th stage, the next 3 stages require an additional AC adapter (AC-ADP-2433), and so on. Therefore please purchase the HR10HR10P-RC-1 (with power feed-thru) to Daisy-Chain both power and control to the next stage. Purchase cable HR10HR10-RC-1 (without power feed-thru) for controlling stage with separately supplied power.
| Name | Daisy-Chain Connecting Cable without Power Feed-thru, for SBIS Series Stages, 1M |
|---|---|
| Weight | 0.4000kgs |
| Guide | For the cable that connects SBIS stages together, please purchase separately HR10HR10P-RC-1 (with power cable) or HR10HR10-RC-1 (without power cable). Please purchase D9HR10-RC-2 separately for the cable that connects the host PC and SBIS. The interface is RS232C. For the power supply, please purchase the recommended AC adapter AC-ADP-2433 separately. Power can be supplied for up to 3 axes. After the 4th axis, an additional AC adapter is required for every 3 axes. A manual knob allows stage adjustment when the power is off. The following sample programs can be downloaded SG Sample or LabVIEW for 32/64-bit Windows |
| Cable Length | 1M |
| Stage Interface | HR10A-10S-10P(73) |
| Daisy Chain Functions | Communication only (no power) |
Out of stock
SKU
HR10HR10-RC-1
€90.00
Customize product
Use this cable for connecting a stage with separately supplied power only. It can only transmit commands but not power. Use the other cable, HR10HR10P-RC-1, for Daisy-Chaining commands and power to the next stage, for more than one stage.
