Biconcave Lens 50.8mm Diameter −299.5mm Focal Length Uncoated
SLB-50.8B-300N
These biconcave lenses are used when a very high negative power is required. They can be used in a multi-element system or alone to produce a diverging cone or virtual image. Sharpe edges, which are common in negative lenses, are removed by beveling to reduce the likelihood of chipping.
◦There are two types of biconvex lenses available; BK7 for use in visible range to infrared wavelength range.
◦Our lenses are listed by outside diameter and focal length to assist your selection according to required specifications.
◦Our lenses are listed by outside diameter and focal length to assist your selection according to required specifications.
Name | Biconcave Lens 50.8mm Diameter −299.5mm Focal Length Uncoated |
---|---|
Weight | 0.0500kgs |
Standard Coatings Available | Yes |
Guide |
|
Remark | - |
Attention |
|
Diameter φD | 50.8mm |
Focal length | −299.5mm |
Material | BK7 |
Design Wavelength | 546.1nm |
Refractive index n<sub>e</sub> | 1.519 |
Coating | Uncoated |
Clear aperture | 90% of the diameter |
Surface Quality (Scratch-Dig) | 20-10 |
Wavelength range of Antireflection Coating | Uncoated |
Diameter φD | φ50.8mm |
Focal length f | −299.5mm |
Edge thickness te | 5.1mm |
Center thickness tc | 3mm |
Back focal length fb | −300.5mm |
Radius of curvature r | 311.4mm |
Centration | <1′ |
Out of stock
SKU
SLB-50.8B-300N
€49.40
These biconcave lenses are used when a very high negative power is required. They can be used in a multi-element system or alone to produce a diverging cone or virtual image. Sharpe edges, which are common in negative lenses, are removed by beveling to reduce the likelihood of chipping.