Near Ultra-violet with 0.7mm Thickness compensation Objective Lens 20mm Focal Length 10x Working Distance 30.72mm

PAL-10-NUV-LC07

This objective lens can be used for laser machining using pulsed laser of THG (355nm) YAG laser. Chromatic aberration is suppressed in both the visible and UV laser wavelength, achieving a high transmittance.
◦With its long working distance and field curvature corrected, its natural observation image is obtained to the periphery of the visual field.
◦With its long working infinity correction function; this objective lens can be used for a laser system and coaxial observation.
◦It is also used for the observation of near ultra-violet light.
◦This objective lens can be used with a pulse laser of visible light (532nm).
◦Laser Damage Threshold (Typical) 0.05J/cm2 (355nm), 0.1J/cm2 (532nm) (Laser pulse width 10ns, repetition frequency 20Hz)
Plus d’information
Nom Near Ultra-violet with 0.7mm Thickness compensation Objective Lens 20mm Focal Length 10x Working Distance 30.72mm
Poids 0.2700kgs
Standard Coatings Available Non
Guide
  • Available fixed objective lens holder (LHO-26).
  • WEB Reference Catalog Code/W4024
  • When the objective lens is fixed to a 2 axis holder, please consult our Sales Division.
  • For laser processing, we offer a dichroic block (DIMC WEB Reference Catalog Code/W2041) and for laser unit with coaxial illumination and observation (OUCI-2).
Attention
  • When an objective lens is used in laser processing, use the diameter of the incident beam to extend to a size of half the pupil diameter (1/e2). A small light spot cannot be achieved when the incident beam is too narrow. Please note if there is a laser energy density increase, there will be a high possibility of damage to the objective lens.
  • The surface of an objective lens can be contaminated by debris during processing. To avoid this, please have sufficient working distance (WD) and insert a thin protective glass on the objective.
  • Magnification is the value when using the imaging lens f=200mm. When used in a microscope lens barrel from other manufacturers there may be different magnifications. The actual magnification should be calculated from the ratio of the focal length of the objective lens and the focal length of the imaging lens to verify the focal length of the imaging lens barrel to be used.
Longueur focale 20mm
Magnification 10×
Numerical Aperture 0.28
Working Distance WD 30.72mm
Focal length f 20mm
Resolution (λ=550nm) 1.0μm
Focal depth (λ=550nm) ±3.5μm
Pupil diameter φ11.2mm
Real field of imaging device (1/2-inch) 0.48×0.64mm
Cover glass material Synthetic Quartz
Weight 0.27kg
En stock
SKU
PAL-10-NUV-LC07
3 548,60 €

Delivery in : 6-12 weeks

This objective lens can be used for laser machining using pulsed laser of THG (355nm) YAG laser. Chromatic aberration is suppressed in both the visible and UV laser wavelength, achieving a high transmittance.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

EUROPE

Redirection to :