Two-axis Shutter Controller
SSH-C2B
Controllers for driving SSH electromagnetic shutters. Can operate two electromagnetic shutters of different types concurrently.
◦Controller can control the SSH-R (old blade type), SHPS (for high-power laser), and BSH2 (for bio) shutters in addition to SSH-25RA and SSH-S.
◦Shutter speed, delay time, and repeat count is set using the front panel control knob.
◦Sample software is available for shutter control and changing various settings using a PC.
◦Controller allows registration of control signals (up to three types) for unknown mechanical electromagnetic shutters (only those for which control signal formats are released), and can close and open the shutters according to their performance. (Please check the instruction manual and make sure that setting of control signals is possible before use.)
◦Shutter speed, delay time, and repeat count is set using the front panel control knob.
◦Sample software is available for shutter control and changing various settings using a PC.
◦Controller allows registration of control signals (up to three types) for unknown mechanical electromagnetic shutters (only those for which control signal formats are released), and can close and open the shutters according to their performance. (Please check the instruction manual and make sure that setting of control signals is possible before use.)
Nom | Two-axis Shutter Controller |
---|---|
Poids | 1.8200kgs |
Guide |
▶取扱説明書はこちらから。 ▶旧タイプシャッターに適応したケーブルもご用意しています。 ▶PCの接続に使用するUSBケーブル(USB-2)やRS-232Cケーブル(RS232C/STR-3)もご用意しています。 WEB参照/カタログコードW9053 ▶顕微鏡用シャッター(BSH)を使用する場合はBSH用シャッターケーブル(FSH-CA-2-LA)をご使用ください。 |
Attention |
▶シャッターコントローラには、ケーブル類は含まれていません。別途、シャッターの仕様を確認してケーブルをご選定ください。 ▶接続しているシャッターとコントローラで設定しているシャッタータイプが異なると、シャッターは正常に開閉しません。シャッタータイプは正しく指定してお使いください。 ▶シグマ光機製以外のシャッターを用いる場合は、適切な電圧やパルス時間を設定してください。設定が異なるとシャッターを破損する可能性があります。 |
Image Label | Two-axis Shutter Controller |
Controllable Number of Units | 2ch |
Power Voltage | DC24V |
Power consumption | 120VA |
Operating temperature | 5 – 40ºC |
Functions |
Shutter type switching : TIMER/BULB mode switching External signal polarity switching : Timer setting Number of times of opening and closing integration |
Shutter Control Voltage <sup>*1</sup> | 5V – 24V |
Shutter control current <sup>*2</sup> | each CH 0.5A (current limit 1A) |
Shutter Speed | 0.2ms – 99990s |
Delay Time | 0.1ms – 999.9ms |
External input | 0 – 5V Input 2ch, Interlock contact input |
External output | 0 – 5V Output 2ch |
Interface | RS232C (D-sub 9 pin female), USB, (TTL) |
Display | LCD ( with white backlight) |
Accessories | AC Adapter (DC24V), Interlock connector |
*1 The voltage range of control signals that can be set when an unknown shutter is used. | |
*2 The current is determined depending on the resistance value of the electromagnetic shutter to be connected. |
En stock
SKU
SSH-C2B
898,80 €
Controllers for driving SSH electromagnetic shutters. Can operate two electromagnetic shutters of different types concurrently.