Two Channel Controller for PDM Series Piezomotor Actuators
PDM-ID-02
A 2-axis controller for piezoelectric drive motors (PDM-**ACT, and VPDM-**ACT). Can be operated by computer control using the RS232C interface, by the jog switch on the front panel, or by TTL I/O.
◦The jog stick is used for easy manual operation.
The speed selecting knob switches jog and step movements for coarse and fine adjustment.
◦ Can be operated from a PC via RS232C/USB interface.
◦ Can be operated from a PC via RS232C/USB interface.
Name | Two Channel Controller for PDM Series Piezomotor Actuators |
---|---|
Weight | 0.6000kgs |
Guide | Sample programs and a manual are available for download from our website. |
Attention | ▶The power supply specification of the PDM-ID-02 is DC+24V 2A. The power supply should be prepared by the customer or purchase AC-ADP-2427. Do not connect this controller to any product other than piezo drive motors (PDM-**ACT). |
Mounting Thread | M3 |
Number of Adjustable Axes | 2 axes |
Interface | RS232C, USB (virtual COM) recognized as virtual serial port from external PC |
Maximum travel speed | 1500pps |
Manual Operation | Jog stick |
Power Voltage | DC24V 2.0A |
Operating temperature | 5 - 40℃ |
Storage Temperature | −20 − 60°C |
Ambient Humidity | 20 - 80%RH(without condensation) |
Dimension Ø x L (Except projection) | 50x152.5x100mm |
Weight | 0.6kg |
Required Power Supply P/N | AC-ADP-2427 |
In stock
SKU
PDM-ID-02
€754.30
A 2-axis controller for piezoelectric drive motors (PDM-**ACT, and VPDM-**ACT). Can be operated by computer control using the RS232C interface, by the jog switch on the front panel, or by TTL I/O.