Polarizing Beamsplitter Cube 10mm 632.8nm

PBS-10-6328

Polarizing beamsplitters consist of two right angle prisms. One of them is coated with dielectric multi-layer polarizing coating on the hypotenuse face. Polarizing beamsplitters split a monochromatic beam entering at zero degree into p-polarization as transmitted and s-polarization as reflected.
◦Four surfaces of the cube are coated with narrowband multi-layer anti-reflection coatings.
◦The losses of input beam of these products are minimized because of no absorption of the dielectric coatings.
◦For cube beamsplitters, unlike plate beamsplitters, beam deviations of transmitted beams and ghosts rarely occur.
More Information
Name Polarizing Beamsplitter Cube 10mm 632.8nm
Weight 0.0050kgs
Standard Coatings Available No
Guide
  • Please contact our Sales Division for customized products. (Customized on size, wavelength etc.)
  • Plate-type Polarizing Beamsplitters (PBS-C) are also available upon your request.
  • WEB Reference Catalog Code/W3026
  • There is also a high extinction ratio Glan-Thompson prism (GTPB/ GTPC).
  • WEB Reference Catalog Code/W3450
Remark -
Attention
  • Input beam from the prism on the side indicated by ○. When the light is incident from the side of the prism without mark, there is a possibility that the characteristics of the transmittance and extinction ratio will change.
  • The transmittance curves are based on actual measurements and might vary between manufacturing lots.
  • The surface flatness is the reflected wavefront distortion of the surface before coating.
  • Be sure to wear laser safety goggles when checking optical path and adjusting optical axis.
Design wavelength 632.8nm
Image Label Polarizing Beamsplitter Cube 10mm 632.8nm
Length 10mm
Material BK7
Surface flatness of substrate λ/4
Angular deviation of transmitted beam <10′
Coating Hypotenuse surface ; Dielectric multilayer coating
Four surfaces ; Multilayer antireflection coating
Incident angle
Transmittance of P polarized light >97%( PBS-4050 ; >90%)
Extinction ratio of transmission Ts:Tp=1:1000
Laser Damage Threshold 0.3J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz)
Surface Quality (Scratch-Dig) 20-10
Wavelength range 632.8nm
A=B=C 10mm
Reflectance of S polarized light >98%
In stock
SKU
PBS-10-6328
€239.50

Delivery in : 6-12 weeks

Polarizing beamsplitters consist of two right angle prisms. One of them is coated with dielectric multi-layer polarizing coating on the hypotenuse face. Polarizing beamsplitters split a monochromatic beam entering at zero degree into p-polarization as transmitted and s-polarization as reflected.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

EUROPE

Redirection to :