Low Dispersion Mirror for High Power Femtosecond Laser 12.7mm Diameter
FLMHP-12.7C05-800
This mirror is designed to provide low wavelength dispersion suitable for use with ultra-short pulse lasers with 100 femtosecond or less.
◦We have designed a special thin film coating that optimizes wavelength dispersion, range and the strength of lasers.
◦It has the effect of suppressing the spread of the pulse width produced by a plurality of reflecting mirrors.
◦There are three types available, FLM1 standard, FLM2 wide wavelength band, and FLMHP for high power femtosecond laser*.
◦These mirrors are designed and produced for usage within the microscopy with femtosecond laser and optical systems with femtosecond time-resolved spectroscopy.
◦It has the effect of suppressing the spread of the pulse width produced by a plurality of reflecting mirrors.
◦There are three types available, FLM1 standard, FLM2 wide wavelength band, and FLMHP for high power femtosecond laser*.
◦These mirrors are designed and produced for usage within the microscopy with femtosecond laser and optical systems with femtosecond time-resolved spectroscopy.
Name | Low Dispersion Mirror for High Power Femtosecond Laser 12.7mm Diameter |
---|---|
Weight | 0.0050kgs |
Standard Coatings Available | No |
Guide |
|
Attention |
|
Design wavelength | 800nm |
Diameter φD | 12.7mm |
Reflectance | >99% |
Material | Synthetic fused silica |
Coating | Dielectric multi-layer coating |
Incident angle | 45°±3° |
Surface flatness | λ/10 |
Parallelism | <5″ |
Surface Quality (Scratch-Dig) | 10−5 |
Clear aperture | 80% of the diameter |
Wavelength Range (S polarization) | 745 - 855nm |
Wavelength Range (P polarization) | 775 - 825nm |
Diameter φD | φ12.7mm |
Thickness t | 5mm |
Reflectance | >99% |
Laser Damage Threshold<sup>*</sup> | 2J/cm2 |
Availability | Please contact |
In stock
SKU
FLMHP-12.7C05-800
€364.90
This mirror is designed to provide low wavelength dispersion suitable for use with ultra-short pulse lasers with 100 femtosecond or less.