25.4-mm, Welded Stainless Steel Flexure Mirror Mount, Bulkhead Mounting
FM-25.4
FM series mirror mounts have a welded, unibody design making them exceptionally slim and sturdy - Ideal for industrial Set-and-Forget alignment. Two thin, stiff flexures allow the mount's pitch and yaw axes to be adjusted independently. FM Flexure Mounts are designed to be bulkhead mounted, i.e. mounted onto a vertical surface. Not only does this save space, but it also increases stability because the mount takes on the structure of the bulkhead. A mirror can be mounted on either of the FM mirror mount's sides, allowing you to choose whether you want to adjust it from the front or back. The FM mounts are loaded with other valuable features like adhesive wells, and keying pin slots. These all-stainless steel mounts are made for standard 12.7-mm (0.5-in.), 25.4-mm (1-in.), and 50.8-mm (2-in.) diameter mirrors.
All FM and FM-L Flexure Mounts use precision 0.250mm (over 100-TPI) thread pitch adjustment screws for exceptional stability and adjustability.
| Name | 25.4-mm, Welded Stainless Steel Flexure Mirror Mount, Bulkhead Mounting |
|---|---|
| Weight | 0.0700kgs |
| Attention | This mount is a welded assembly and cannot be disassembled. |
| Angle Range | ±1.5° |
| Material | Stainless Steel |
| Number of Control Axes | 2 Axes |
| Optic Diameter | φ25.4mm |
| Mount Material | Stainless Steel |
| Compatible Optics Diameter | 25, 25.4mm |
| Compatible Optics Thickness | 3 - 7mm |
| Mirror Loading | Front, both sides of mount |
| Mirror Clamping Mechanism | Adhesive or Set Screw, 0.9-mm Hex Key |
| Recommended Mirror Clamping Torque | 0.07 +/-0.01 Nm (10+/-2 oz.-in.) |
| Number of Adjustment Axes | 2 points |
| Angular Travel Range | +/-1.5 deg. |
| Adjuster Thread | M3 x 0.250mm(~100 TPI) |
| Dowel Pin Keys | 2mm Slot and Hole |
| Bulkhead Mounting | Threaded and clearance holes for M3 screws |
In stock
SKU
FM-25.4
€224.70
Customize product
FM series mirror mounts have a welded, unibody design making them exceptionally slim and sturdy - Ideal for industrial Set-and-Forget alignment. Two thin, stiff flexures allow the mount's pitch and yaw axes to be adjusted independently. FM Flexure Mounts are designed to be bulkhead mounted, i.e. mounted onto a vertical surface. Not only does this save space, but it also increases stability because the mount takes on the structure of the bulkhead. A mirror can be mounted on either of the FM mirror mount's sides, allowing you to choose whether you want to adjust it from the front or back. The FM mounts are loaded with other valuable features like adhesive wells, and keying pin slots. These all-stainless steel mounts are made for standard 12.7-mm (0.5-in.), 25.4-mm (1-in.), and 50.8-mm (2-in.) diameter mirrors.
Resources & Downloads
Related Products
Check items to add to the cart or
