200W Broadband Thermal Sensor, 300 mJ - 200 J, 25-mm Sensor Aperture, used with PC thru USB Connection
PM200-25D-HP-USB
The Opto Sigma PM200-25D-HP-USB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 200W with 10mW resolution. The PM200-25D-HP-USB operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.
-
| Name | 200W Broadband Thermal Sensor, 300 mJ - 200 J, 25-mm Sensor Aperture, used with PC thru USB Connection |
|---|---|
| Weight | 0.0050kgs |
| Guide | - |
| Attention | - |
| Energy Range | 300 mJ - 200 J |
| Power Range | 150 mW - 200W |
| Wavelength Range | 0.19 - 11µm |
| Aperture | 40mm |
| Cooling | Convection |
| Max Intermitent Power | 250W |
| Power Resolution | 10mW |
| Noise Equivalent Power (NEP) | 10mW |
| Response Time (0-90%) | 2.2s |
| Power Calibration Uncertainty | +/-3% |
| Power Linearity | +/-1% |
| Energy Resolution | 10mJ |
| Energy Calibration Uncertainty | +/-5% |
| Type of Absorber | HPB |
| Maximum Power Density | 4kW/cm2 |
| Max Energy Density | 5ms pulse width: 36 J/cm2, 10us pulse width: 1.2 J/cm2, 10ns pulse width: 0.3 J/cm2 |
| Interface | USB |
In stock
SKU
PM200-25D-HP-USB
€1,860.90
Customize product
The Opto Sigma PM200-25D-HP-USB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 200W with 10mW resolution. The PM200-25D-HP-USB operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.
