Kinematic Center Mirror Mount for 12.7mm Mirror

MHI-12.7

Skip to the beginning of the images gallery

The Kinematic Center Mount is designed to allow the mirror to be loaded from the rear, keeping the reflective front surface centered above the mounting hole.

Details

◦When this mount is rotated 45 degrees on an optical bench, the center of mirror will stay at the optical axis.
◦Cutouts and bevels allow these to be used as beamsplitter holders and not interfere with the transmitted beam.
◦Building the mirror frame into the support of the holder keeps the mount thin with a small footprint.
◦The small footprint allows more room to access the adjusters compared to regular kinematic mirror holders.
◦Includes alignment pin holes to accurately place mount in OEM instruments(φ3H7 except MHI-12.7, which is φ2H7).

More Information

More Information
Name	Kinematic Center Mirror Mount for 12.7mm Mirror
Weight	0.0500kgs
Guide	Vertical control gimbal mirror and beamsplitter holders (BSHL) where the rotation of the fine adjustment matches the mirror center are also available. WEB Reference Catalog Code/W4021 Can be mounted using an M4 low head screw to secure them from the top or an M6 threaded post from the bottom. (MHI-12.7 can be mounted with an M3 low head screw from the top and M4 threaded post from the bottom.)
Attention	MHI-12.7 limits the tilt and rotation to be ±1° and ±2° respectively, even when a low and small head hexagon socket head cap screw is used. When securing a mirror with a low head hexagon socket head cap screw, a hex wrench may interfere with the mirror. Please retract the mirror by turning the rotation and tilt adjustment screws before tightening the low head hexagon socket head cap screw. When securing a mirror on a baseplate with a M4 low head hexagon socket head cap screw, there will be ±1mm clearance.
Image Label	Kinematic Center Mirror Mount for 12.7mm Mirror
Diameter	12.7mm
Compatible Optics Diameter	φ12.7mm
Compatible Optics Thickness	2 - 9mm
Clear Aperture	φ10.7mm
Reflected Clear Aperture<br> (45°Incidence)	φ6.8mm
Transmitted Beam Clear Aperture<br> (45°Incidence)	φ5mm *When light is transmitted through a BK7 plane parallel substrate of 3mm thickness.
Adjustment Range /Tilt	±3°
Adjustment Range /Rotation	±3°
Resolution /Tilt	about 0.74°/rotation
Resolution /Rotation	about 0.74°/rotation

In stock

SKU

MHI-12.7

€113.10

The Kinematic Center Mount is designed to allow the mirror to be loaded from the rear, keeping the reflective front surface centered above the mounting hole.

Kinematic Center Mirror Mount for 12.7mm Mirror

Resources & Downloads