Biconcave Lens 50mm Diameter −59.5mm Focal Length Uncoated
SLB-50B-60N
These biconcave lenses are used when a very high negative power is required. They can be used in a multi-element system or alone to produce a diverging cone or virtual image. Sharpe edges, which are common in negative lenses, are removed by beveling to reduce the likelihood of chipping.
◦There are two types of biconvex lenses available; BK7 for use in visible range to infrared wavelength range.
◦Our lenses are listed by outside diameter and focal length to assist your selection according to required specifications.
◦Our lenses are listed by outside diameter and focal length to assist your selection according to required specifications.
| Name | Biconcave Lens 50mm Diameter −59.5mm Focal Length Uncoated |
|---|---|
| Weight | 0.0500kgs |
| Standard Coatings Available | Yes |
| Guide |
|
| Remark | - |
| Attention |
|
| Diameter φD | 50mm |
| Focal length | −59.5mm |
| Material | BK7 |
| Design Wavelength | 546.1nm |
| Refractive index n<sub>e</sub> | 1.519 |
| Coating | Uncoated |
| Clear aperture | 90% of the diameter |
| Surface Quality (Scratch-Dig) | 20-10 |
| Wavelength range of Antireflection Coating | Uncoated |
| Diameter φD | φ50mm |
| Focal length f | −59.5mm |
| Edge thickness te | 13.5mm |
| Center thickness tc | 3mm |
| Back focal length fb | −60.5mm |
| Radius of curvature r | 62.28mm |
| Centration | ＜1′ |
In stock
SKU
SLB-50B-60N
€51.90
These biconcave lenses are used when a very high negative power is required. They can be used in a multi-element system or alone to produce a diverging cone or virtual image. Sharpe edges, which are common in negative lenses, are removed by beveling to reduce the likelihood of chipping.
Resources & Downloads
Related Products
Check items to add to the cart or
