40x40mm Square, Steel, EXC Bearing Rotation Stage, +/-10 Deg Fine Adjustment, Micrometer Drive, M3 Threads

KSPT-406MH

3d-simple-product
Square footprint of rotation stages with a clear aperture at the center. total stage thickness 10mm.
Can be installed in arbitrary orientations such as vertical or inverted due to superior stiffness inherent to the intergrated bearing way design.

See the Right Handed version of this product




More Information
Name 40x40mm Square, Steel, EXC Bearing Rotation Stage, +/-10 Deg Fine Adjustment, Micrometer Drive, M3 Threads
Weight 0.1100kgs
Guide
  • Low-profile X axis steel stage (TSDT) with stage thickness of 10mm is also available. (WEB Reference Catalog Code/W7003)
  • Opposed clamp locking mechanism standard.
  • The part number suffix FP indicates products with fine-pitch screws instead of standard micrometers.
  • Fine Pitch screws have a screw pitch of 0.25mm and require a hex wrench or the optional hex wrench with knob (KCL) for adjustment.(WEB Reference Catalog Code/W8008-3)
Attention
  • When installing on a vertical surface, please make sure to place the micrometer head pointing down so that gravity pulls in the same direction as the springs. If the springs oppose gravity, they may not be able to withstand the load and not be able to hold the stage against the micrometer.
Image Label Rotation Stage Steel Extended Contact 40mm Square 20 Degree Fine Micrometer Adjustment Lockable with Aperture and Metric Holes
Stage Size 40×40mm
Rotation Range ±10°
Load Capacity 78.4N (8.0kg)
Mounting Thread M3
Stage Size 40×40mm
Rotation Range ±10°
Guide Method Extended Contact Ball Bearing Guide
Primary Material Steel
Finish Black matte
Load Capacity 78.4N(8.0kgf)
Max. Moment Capacity / Pitch 3.9N・m
Max. Moment Capacity / Roll 3.9N・m
Max. Moment Capacity / Yaw -
Moment Stiffness / Pitch 0.3″/N・cm
Moment Stiffness / Roll 0.6″/N・cm
Moment Stiffness / Yaw -
Parallelism 30μm
Eccentricity 10μm
Wobble 10μm
In stock
SKU
KSPT-406MH
€252.70

Delivery in : in stock

Square footprint of rotation stages with a clear aperture at the center. total stage thickness 10mm.
Can be installed in arbitrary orientations such as vertical or inverted due to superior stiffness inherent to the intergrated bearing way design.

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

EUROPE

Redirection to :