Two-Channel Shutter Controller For SSH-S, SSH-RA, and SHPS-series Shutters
SSH-C2B-A
The controller can control SHPS (for high-power laser), BSH2 (for bio) shutters, and SSH-25RA and SSH-S. Shutter speed, delay time, and repeat count is set using the front panel control knob. Sample software is available for shutter control and changing various settings using a PC.
The controller allows registration of control signals (up to three types) for unknown mechanical electromagnetic shutters (only those for which control signal formats are released). It can close and open the shutters according to their performance. (Please check the instruction manual and make sure that setting control signals is possible before use.)
| Name | Two-Channel Shutter Controller For SSH-S, SSH-RA, and SHPS-series Shutters |
|---|---|
| Gewicht | 1.8200kgs |
| Anmerkung | SSH-C2B-A can operate two electromagnetic shutters of different types concurrently. |
| Achtung | -This shutter controller does not come with cables. Check the shutter specification and select the appropriate cable. -If the shutter connected to the controller is different from the shutter type selected on the controller, the shutter will not operate properly. -To use a shutter other than OptoSigma shutters, please set the appropriate voltage and pulse time. Incorrect settings may damage the shutter. |
| Kabellänge | 2 m |
| Number of Control Channels | Two Channels |
| Functions | Shutter type switching : TIMER/BULB mode switching External signal polarity switching : Timer setting Number of times of opening and closing integration |
| Shutter Speed | 0.2ms – 99990s |
| Delay Time | 0.1ms – 999.9ms |
| Panel Display | LCD ( with white backlight) |
| Computer Interface | RS232C (D-sub 9 pin female), USB, (TTL) |
| Power Consumption | 120W |
| Included Accessories | AC adapter (DC24V) Interlock connector |
| Operating Temperature Range | 5 to 40C |
| External output | 0 – 5V Output 2 Channel |
| External input | 0 – 5V Input 2 Channel, Interlock contact input |
| Shutter Control Voltage | 5V – 24V |
| Shutter Control Current | For Each Channel: 0.5A (current limit 1A) |
Auf Lager
SKU
SSH-C2B-A
1.051,10 €
Customize product
The controller can control SHPS (for high-power laser), BSH2 (for bio) shutters, and SSH-25RA and SSH-S. Shutter speed, delay time, and repeat count is set using the front panel control knob. Sample software is available for shutter control and changing various settings using a PC.
Verwandte Produkte
