80X, 2nd and 3rd YAG Harmonic Objective Lens
PFL-80-UV-AG-LC00-A
This objective lens can be used for laser machining using a pulsed laser of SHG (532nm) YAG laser and FHG (266nm) YAG. Chromatic aberration is suppressed in both the visible and UV laser wavelength, achieving a high transmittance.
With its long working distance and field curvature corrected, its natural observation image is obtained from the periphery of the visual field. It is the long-working infinity correction function that is used to introduce a laser system and coaxial observation. ◦It is also used for the observation of ultraviolet light. Laser Damage Threshold (Typical) 0.09 J/cm2 (266nm), 0.2J/cm2 (532nm) (Laser pulse width 10ns, repetition frequency 20Hz)
| Name | 80X, 2nd and 3rd YAG Harmonic Objective Lens |
|---|---|
| Gewicht | 0.3500kgs |
| Standardbeschichtungen verfügbar | Nein |
| Leitfaden | Guide - Available fixed objective lens holder (LHO-26). When the objective lens is fixed to a 2-axis holder, please consult our Sales Division. For laser processing, we offer a dichroic block (DIMC), and for laser unit with coaxial illumination and observation (OUCI). |
| Achtung | When an objective lens is used in laser processing, use the diameter of the incident beam to extend to a size of half the pupil diameter (1/e2). A small light spot cannot be achieved when the incident beam is too narrow. Please note if there is a laser energy density increase, there will be a high possibility of damage to the objective lens. The surface of an objective lens can be contaminated by debris during processing. To avoid this, please have sufficient working distance (WD) and insert a thin protective glass on the objective. Magnification is the value when using the imaging lens f=200mm. When used in a microscope lens barrel from other manufacturers there may be different magnifications. The actual magnification should be calculated from the ratio of the focal length of the objective lens and the focal length of the imaging lens to verify the focal length of the imaging lens barrel to be used. |
| Brennweite | 2.5mm |
| Vergrößerung | 80× |
| Numerische Apertur | 0.55 |
| Arbeitsabstand WD | 10.0mm |
| Item name | LCD MPlan UV 80x |
| Design Wavelengths | YAG Laser SHG (532nm) and FHG (266nm) |
| Resolution (at 550nm) | 0.5um |
| Focal depth (at 550nm) | +/-0.9um |
| Pupil diameter | 2.8mm |
| Real field of View (Imaging device 1/2-inch) | 0.06 x 0.08mm |
Auf Lager
SKU
PFL-80-UV-AG-LC00-A
12.814,30 €
Customize product
This objective lens can be used for laser machining using a pulsed laser of SHG (532nm) YAG laser and FHG (266nm) YAG. Chromatic aberration is suppressed in both the visible and UV laser wavelength, achieving a high transmittance.
