Dünne Strahlteilerplatte 0.3mm Dicke

MPSMH-30C0.3-1-550

Extremely thin beamsplitter. It can be inserted into an optical light path without any beam shift or chromatic dispersion for any light transmittance application.

Details

◦We offer 2 choices of thickness, 300um and 90um.
◦Dielectric multi-layer optical coating with reflectance and transmittance ratios at 1:1.
◦Dielectric multi-layer optical coating on the front surface and AR coating on the rear surface to provide a mirror with no loss of power.
◦Due to the fabrication method, these offer good durability and high resistance against vibration making them an excellent alternative to traditional pellicle beamsplitters.

Weitere Informationen

Weitere Informationen
Name	Dünne Strahlteilerplatte 0.3mm Dicke
Gewicht	0.0070kgs
Standardbeschichtungen verfügbar	Nein
Leitfaden	For customization, we can offer different sizes, wavelengths and deviation ratios. WEB-Referenzkatalogcode/W3802 Please contact our Sales Division with your requests.
Achtung	Thin beamsplitters are extremely thin and fragile. Special care must be taken during cleaning and handling. When removing dust from the surface, do not use optics tissue paper to clean. Use a compress gas spray instead. When applying a laser linear polarized light, the direction of polarization may affect the amount of reflectance and transmittance. For divergence usage of 1:1 ratio, ensure the direction of polarization is set to 45 degrees or use a circular polarizer. The transmittance wavelength properties may be different if the incident angle is other than 45 degrees. Avoid pushing the glass retainer as the mirror can bend or break. When handling, please use the other metal frame. The surface reflectance accuracy may deteriorate when used outside recommended operating temperature. The phase difference of incident light cannot be preserved on light transmittance and reflectance. Please use a wave plate to compensate.
Image Label	Plate Type Thin Beamsplitter 0.3mm Thick
Material	Quarzglas
Beschichtung	Vorderseite ; Dielektrische Mehrlagenbeschichtung Rückseite (45 degrees taper hole) ; Antireflexbeschichtung
Einfallswinkel	45°
Transmission <br> (Average P and S)	50±5% (average with respect to wavelength.)
Divergenzverhältnis <br> (Reflektionsgrad : Transmission)	1 : 1
Oberflächenqualität <br> (Scratch-Dig)	40-20
Freie Apertur	φ10mm
Wellenlängenbereich	400 - 700nm
Optics Thickness	0.3±0.03mm
Wavefront distortion after coating	Reflektionsgrad ; λ , Transmission ; λ

Auf Lager

SKU

MPSMH-30C0.3-1-550

537,40 €

Extremely thin beamsplitter. It can be inserted into an optical light path without any beam shift or chromatic dispersion for any light transmittance application.

Dünne Strahlteilerplatte 0.3mm Dicke

Resources & Downloads