50X85mm Platform, Y-Z-Pitch-Yaw Kinematic Alignment Stage with Locks, Aluminum, M2, M3, M4 Threads
TLF-5085
TLF Four-Axis Alignment Stages have both linear and angular adjustments for the alignment of one optical axis to another. Simultaneous operation of both left and right axes performs linear motion (Z-axis, Y-axis), and single-axis operation performs tilt (Pitch, Yaw) adjustment. Each fine adjustment screw is equipped with a locking mechanism. The top platform has M2, M3, and M4 tapped holes for mounting our standard linear and rotation stages. They are ideal for the alignment of laser light sources, beam expanders, etc.
The base hole pattern allows mounting on M6 (metric) and 1/4-20 (inch) type surface plates, optical table tops, and rod stands.
| Name | 50X85mm Platform, Y-Z-Pitch-Yaw Kinematic Alignment Stage with Locks, Aluminum, M2, M3, M4 Threads |
|---|---|
| Gewicht | 0.4700kgs |
| Leitfaden | Use a 2mm wrench for the TLF-4060 and a 3mm wrench for the TLF-5085 to operate the fine adjustment screw. TLF-5085 can remove the fine adjustment screw and replace it with PDM Series Piezomotor Adjusters etc. If you wish to change to PDM, please contact our sales department. |
| Achtung | Please load only right-side up on a horizontal surface because the kinematic support structure can not be used upside down. Neither Allen wrench nor knob hex wrench is included. |
| Stage Platform Size | 50x85mm |
| Nominal Platform Height Above Mountng Surface | 30mm |
| Pitch Angle Range | +/-4.5 deg |
| Yaw Angle Range | +/-2.4 deg |
| Y-Axis Travel Range | +/-2.0mm |
| Z-Axis (vertical) Travel Range | +/-1.5mm |
| Primary Material | Aluminum |
| Finish | Black anodized |
| Load Capacity | 20N |
Auf Lager
SKU
TLF-5085
813,40 €
Customize product
TLF Four-Axis Alignment Stages have both linear and angular adjustments for the alignment of one optical axis to another. Simultaneous operation of both left and right axes performs linear motion (Z-axis, Y-axis), and single-axis operation performs tilt (Pitch, Yaw) adjustment. Each fine adjustment screw is equipped with a locking mechanism. The top platform has M2, M3, and M4 tapped holes for mounting our standard linear and rotation stages. They are ideal for the alignment of laser light sources, beam expanders, etc.
The base hole pattern allows mounting on M6 (metric) and 1/4-20 (inch) type surface plates, optical table tops, and rod stands.
Verwandte Produkte
Wählen Sie die Artikel aus, die dem Warenkorb hinzugefügt werden sollen, oder
