16mm Cage Components
OptoSigma’s 16mm CAGE Systems P16 (diameter: 4mm rods, 16mm pitch between the rods) A large selection of accessories and adapters are available for integration into optical setups using mounting posts or lens tubes. Optic holders and accessories are supported by four (4) rigid steel rods (CAGES) to mount optical components along a common optical axis. In addition, the optic holders can split the optical axis and the cage into two or fold it 90 degrees. The CAGE system has no distinction of orientation. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Our systems are compatible with industry standards, though, our intent was to design and build cage systems that are more stable and accurate vs. others on the market today. A unique feature is the ability to place and remove individual components by “Dropping them In-Place” when 3-rods are utilized. This is highly unique and convenient. Need help specifying components? Our sales engineers are standing by. Contact us anytime.
-
-
Cage Alignment HolderSKU : C16-AP 0A plate that holds the optics of dia. 12.7mm in the 16mm Cage assembly and enables coarse position adjustment (movable range dia.1mm) in the plane. Loosen the two screws of the movable plate and adjust the position of the movable plate, then manually tighten and fix it. Learn More -
Cage Normal Incidence Mirror MountsSKU : C16-KNH 0It is a mirror holder for normal incidence placed at the end of the rod. Precise angle adjustment is possible with the kinematic mirror mount. Learn More -
Cage Filter HolderSKU : C16-NDWH 0Specially designed holder for Cage system, in which multiple filters are assembled to a revolver and inserted into the light path by rotating the revolver.
The Revolver can be used to switch the amount of transmitted light by installing ND filters with different OD, or to switch the wavelength of transmitted light by installing color filters, etc. Learn More -
Cage Two-axis Optic HoldersSKU : C16-LHC-TAT 0It is a holder that can place a pinhole in the cage system and fine adjust the position of the pinhole in the plane. Learn More -
Cage Fixed Optic MountSKU : C16-BP 0It is a holder for incorporating optical elements such as lenses and filters into the cage system. Learn More -
Cage Post Mounting BaseSKU : C16-RMB 0It is a part for attaching the cage system to the post stand and others. Learn More -
Cage Mounting CubeSKU : C16-CB 0Cage Mounting Cube is used to fix cube type optics with 16mm compact cage system. Learn More -
Cage Alignment TargetsSKU : C-TGH-16 0A target plate used for optical axis adjustment of the cage system. Learn More -
Cage Slot in Fixed Optic Mounts (Standard)SKU : C-SMH - BP - SLFH-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate of cage system has two types of addon methods which are side-in type and slide-in type. The side-in type can attach and detach the holder plate while the cage system are built. The slide-in type must be built in the cage system beforehand, but it is possible to firmly fix the holder plate to the cage (rod).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
Cage Guide RodsSKU : C-RO-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ Mirror holders are supported by four (or three) rods (cages).
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Learn More -
Cage Prism HoldersSKU : C-PLH - PAD-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
Cage Polarizer HoldersSKU : C-MPH-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
Cage Two-axis Optic HoldersSKU : C-LHC - TAT-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
Cage Iris Diaphragm HoldersSKU : C-IH-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Learn More -
Cage 45-Degree Mirror MountsSKU : C-AMH-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Learn More
