Light Path Corrector Synthetic Fused Silica 50x50mm 355nm
WSQNA-50S03-1-355-0/45D
With a variable beamsplitter, the incident angle of a laser can be changed. The (R:T) ratios can also be modified. This is commonly used to adjust the light intensity of the laser without a variable adjustment of the light intensity or the laser to be stabilized.
◦The beam shift caused by the tilt of the beamsplitter can be removed by using a correcting plate. (See how to use)
◦It can be used for arbitrary polarization. However, the transmittance characteristic depends on the polarization.
◦It can be used for arbitrary polarization. However, the transmittance characteristic depends on the polarization.
| Name | Light Path Corrector Synthetic Fused Silica 50x50mm 355nm |
|---|---|
| Weight | 0.0170kgs |
| Standard Coatings Available | No |
| Guide |
|
| Remark | - |
| Attention |
|
| Design wavelength | 355nm |
| Image Label | Light Path Corrector Synthetic Fused Silica 50x50mm 355nm |
| Laser Damage Threshold | 1J/cm<sup>2</sup> |
| Material | Synthetic fused silica |
| Material | Synthetic fused silica |
| Surface flatness | λ |
| Parallelism | ＜5″ |
| Coating | Both surfaces ; Antireflection coating |
| Surface Quality <br> (Scratch-Dig) | 10−5 |
| Clear aperture | Circle that internally connected to 90% of the side length |
| Effective beam incident diameter | Ellipsoidal 30×43mm (Angle of inclinaison) |
| Dimensions | 50 × 50mm |
| Wavelength range | 355nm |
| Transmittance of S Polarization (θ=0° - 45°) | 97% (average with respect to wavelength.) |
| Laser Damage Threshold <sup>*</sup> | 1J/cm2 |
| Availability | Please contact |
In stock
SKU
WSQNA-50S03-1-355-0/45D
€269.70
Customize product
With a variable beamsplitter, the incident angle of a laser can be changed. The (R:T) ratios can also be modified. This is commonly used to adjust the light intensity of the laser without a variable adjustment of the light intensity or the laser to be stabilized.
