Enabled filters :
| Name | Travel | Load Capacity | Delivery | Price | Add to cart | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
i
13mm Travel 5-Phase Stepping Motor Actuator, Non-Rotating Ball Tip
SGSP-13ACTR-B0 |
0 - 13mm | 29.4N (3.0kg) |
in stock
|
€499.70
|
|
|
||||||||||||||||||
|
i
6.5mm Travel 5-Phase Stepping Motor Actuator, Non-Rotating Flat Tip
SGSP-6.5ACT |
0 - 6.5mm | 39.2N (4.0kg) |
1 week
|
- |
|
|||||||||||||||||||
|
i
6.5mm Travel 5-Phase Stepping Motor Actuator, Non-Rotating Ball Tip, Right-Handed
SGSP-6.5RACTR |
0 - 6.5mm | 39.2N (4.0kg) |
6-12 weeks
|
- |
|
|||||||||||||||||||
|
i
25mm Travel 5-Phase Stepping Motor Actuator, Non-Rotating Flat Tip
SGSP-25ACT-B0 |
0 - 25mm | 29.4N (3.0kg) |
6-12 weeks
|
- |
|
|||||||||||||||||||
|
i
6.5mm Travel 5-Phase Stepping Motor Actuator, Non-Rotating Ball Tip
SGSP-6.5ACTR |
0 - 6.5mm | 39.2N (4.0kg) |
6-12 weeks
|
- |
|
|||||||||||||||||||
|
i
13mm Travel 5-Phase Stepping Motor Actuator, Non-Rotating Flat Tip
SGSP-13ACT-B0 |
0 - 13mm | 29.4N (3.0kg) |
1 week
|
€499.70
|
|
|
||||||||||||||||||
|
i
25mm Travel 5-Phase Stepping Motor Actuator, Non-Rotating Ball Tip
SGSP-25ACTR-B0 |
0 - 25mm | 29.4N (3.0kg) |
1 week
|
- |
|
|||||||||||||||||||
|
i
6.5mm Travel 5-Phase Stepping Motor Actuator, Non-Rotating Flat Tip, Right-Handed
SGSP-6.5RACT |
0 - 6.5mm | 39.2N (4.0kg) |
1 week
|
- |
|
You must be logged in to ask questions
Selection Guide for Stepper Motor Controllers
|
Groups |
Description |
Control Axis Options |
Compatible Stages Series |
Computer Interface Options |
Micro Stepping |
Min. / Max. Driving Speed |
Additional Features |
Relative Price |
|
Standard Stepper Controllers |
The GSC series controllers provide basic control for the 5-phase stepper motor stages.
|
OSMS, OSMS-ZF, OSMS-40/60YAW, TAMM, OSMS-A HPS, HDS, SGSP-ACT |
RS232C
|
Up to 2 steps |
100 Pulses/Sec 20,000 Pulses/Sec
|
Limit switch detection, Requires AC-ADP-2427 power supply |
$ |
|
|
Preset Position Controller |
The GIP-101B is designed to control the SIZM and SZLM motorized zoom microscopes and objective turrets but can also be used for most stepper motor stages also. |
|
OSMS, OSMS-YAW, TAMM100, SGSP-ACT, LACR, LACS, SIZM, SZLM |
USB |
Up to 250 steps |
1 Pulse/Sec 500,000 Pulses/Sec
|
5-point preset position function |
$$$ |
|
Micro Stepping Controller |
The SHOT-702 series controller includes a micro-step driver to enable ultra-fine resolution for the stepper motor stages and actuators. |
|
OSMS, OSMS-ZF, OSMS-YAW, TAMM, OSMS-A/B, HPS, HDS, SGSP-ACT |
RS232C, USB |
Up to 250 steps |
1 Pulse/Sec 500,000 Pulses/Sec
|
Limit switch detection, E-Break for Motor |
$$$ |
|
Low Noise Controller |
The HSC 3-axis controller is designed to provide low noise and high current capacity for driving larger stepper motor stages. The driving speed is 8X higher than the other controllers |
|
OSMS, OSMS-ZF, OSMS-YAW, TAMM, OSMS-A/B, HPS, HDS
|
USB |
40 steps, fixed |
1 Pulse/Sec 4,000,000 Pulses/Sec
|
Low noise and vibration driver design, High driving current capacity, 3-axis Linear Interpolation, Circular Interpolation |
$$$$$$ |
|
Closed-Loop Controller |
The SHOT-GS controllers provide full closed-loop functionality for 2- or 4- axis stage systems. |
|
Feedback Stages: OSMS(CS), HST(GS)
|
GPIB, RS232C, USB |
Up to 250 steps |
1 Pulse/Sec 500,000 Pulses/Sec
|
Closed-loop Control, Control programs can be stored in internal memory, Linear Interpolation (2 axes), Circular Interpolation, Requires CJ-200A control pad |
$$$$$$$ |
|
Closed Loop, Extendable Controller |
The HIT controllers can be daisy-chained together to control 8 stages. They run in a master/slave configuration and provide full closed-loop functionality |
|
Feedback Stages: OSMS(CS), HST(GS)
|
RS232C, USB, Ethernet |
Up to 250 steps |
1 Pulse/Sec 500,000 Pulses/Sec
|
Can be daisy-chained to control up to 8 axes, Closed-loop control function, Requires the AC-ADP-2427 power supply for each unit. |
2-Axes: $$$, Additional Axis: $
|
