65X65mm Piezo-Assist Z-Axis Stage, (Vertical Platform/Base) +/-12.5mm, M6 Threads

TADC-651SZ25-M6PA

CE
Vertical mounting type Z-axis stage that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that require high resolution position adjustment. Stage sizes 25x25, 40x40, 60x60, and 65x65mm are available.

See the Right Handed version of this product


More Information
Name 65X65mm Piezo-Assist Z-Axis Stage, (Vertical Platform/Base) +/-12.5mm, M6 Threads
Weight 0.3100kgs
Guide
  • Use the piezo assist dedicated controller (PASC) to adjust the fine movement mechanism. The piezo assist stage comes with a dedicated connection cable (2m) for the piezo assist controller.
Attention ▶When installing the stage, be careful not to give a shock to the micrometer bracket. Otherwise, the piezo assist mechanism may be damaged.
▶ When the power of the piezo assist dedicated controller (PASC) is turned off, the position adjustment of the piezo assist will be changed, and position for fine adjustment will be shifted.
Stage Size 65×65mm
Travel ±12.5mm
Mounting Thread M6
Lead of Actuator 0.5mm
Micrometer Readable Resolution 0.01mm
Guide Method Extended Contact Ball Bearing Guide
Primary Material Aluminum
Finish Black anodized
Travel Accuracy / Straightness 3μm
Squareness -
Max. Moment Capacity / Pitch 4.9N・m
Max. Moment Capacity / Roll 4.9N・m
Moment Stiffness / Pitch 0.4″/N・cm
Running Parallelism 20μm
Out of stock
SKU
TADC-651SZ25-M6PA
€821.40
Vertical mounting type Z-axis stage that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that require high resolution position adjustment. Stage sizes 25x25, 40x40, 60x60, and 65x65mm are available.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

GERMANY

Redirection to :