16 mm Käfigkomponenten
Die 16-mm-Käfigsystemme von OptoSigma P16 (Durchmesser: 4-mm-Stäbe, 16-mm-Abstand zwischen den Stäben) Eine große Auswahl an Zubehör und Adaptern ist für die Integration in optische Setups mit Montagepfosten oder Linsentuben erhältlich. Optikhalter und Zubehör werden von vier (4) starren Stahlstangen (Käfig) getragen, um optische Komponenten entlang einer gemeinsamen optischen Achse zu montieren. Darüber hinaus können die Optikhalter die optische Achse und den Cage in zwei Teile teilen oder um 90 Grad klappen. Das Käfigsystem hat keine Orientierungsunterscheidung. Daher ist es möglich, den Halter in verschiedenen Ausrichtungen zu platzieren, was praktisch ist, um ein dreidimensionales optisches System zu konstruieren. Unsere Systeme sind mit Industriestandards kompatibel, aber unsere Absicht war es, Käfigsysteme zu entwickeln und zu bauen, die stabiler und genauer sind als herkömmliche. Ein einzigartiges Merkmal ist die Möglichkeit, einzelne Komponenten zu platzieren und zu entfernen, indem Sie sie an Ort und Stelle einbringen. Dies ist nur möglich, wenn 3 Stangen verwendet werden. Das ist einzigartig und praktisch. Benötigen Sie Hilfe bei der Auswahl von Komponenten? Unsere Vertriebsingenieure stehen bereit. Kontaktieren Sie uns jederzeit.
-
-
Cage Alignment HolderArtikelnummer : C16-AP 0A plate that holds the optics of dia. 12.7mm in the 16mm Cage assembly and enables coarse position adjustment (movable range dia.1mm) in the plane. Loosen the two screws of the movable plate and adjust the position of the movable plate, then manually tighten and fix it. Mehr erfahren -
Cage Normal Incidence Mirror MountsArtikelnummer : C16-KNH 0It is a mirror holder for normal incidence placed at the end of the rod. Precise angle adjustment is possible with the kinematic mirror mount. Mehr erfahren -
Cage Filter HolderArtikelnummer : C16-NDWH 0Specially designed holder for Cage system, in which multiple filters are assembled to a revolver and inserted into the light path by rotating the revolver.
The Revolver can be used to switch the amount of transmitted light by installing ND filters with different OD, or to switch the wavelength of transmitted light by installing color filters, etc. Mehr erfahren -
Cage Two-axis Optic HoldersArtikelnummer : C16-LHC-TAT 0It is a holder that can place a pinhole in the cage system and fine adjust the position of the pinhole in the plane. Mehr erfahren -
Cage Fixed Optic MountArtikelnummer : C16-BP 0It is a holder for incorporating optical elements such as lenses and filters into the cage system. Mehr erfahren -
Cage Post Mounting BaseArtikelnummer : C16-RMB 0It is a part for attaching the cage system to the post stand and others. Mehr erfahren -
Cage Mounting CubeArtikelnummer : C16-CB 0Cage Mounting Cube is used to fix cube type optics with 16mm compact cage system. Mehr erfahren -
Cage Alignment TargetsArtikelnummer : C-TGH-16 0A target plate used for optical axis adjustment of the cage system. Mehr erfahren -
Cage Slot in Fixed Optic Mounts (Standard)Artikelnummer : C-SMH - BP - SLFH-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate of cage system has two types of addon methods which are side-in type and slide-in type. The side-in type can attach and detach the holder plate while the cage system are built. The slide-in type must be built in the cage system beforehand, but it is possible to firmly fix the holder plate to the cage (rod).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Mehr erfahren -
Cage Guide RodsArtikelnummer : C-RO-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ Mirror holders are supported by four (or three) rods (cages).
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Mehr erfahren -
Cage Prism HoldersArtikelnummer : C-PLH - PAD-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Mehr erfahren -
Cage Polarizer HoldersArtikelnummer : C-MPH-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Mehr erfahren -
Cage Two-axis Optic HoldersArtikelnummer : C-LHC - TAT-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Mehr erfahren -
Cage Iris Diaphragm HoldersArtikelnummer : C-IH-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera. Mehr erfahren -
Cage 45-Degree Mirror MountsArtikelnummer : C-AMH-16 0◦ The cage system has two types, P30 (Dia. 6mm rods, 30mm pitch between the rods) and P16 (Dia. 4mm rods, 16mm pitch between the rods).
◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system. Mehr erfahren
