Cage Two-axis Optic Holder

C16-LHC-12.7

It is a holder that can place a pinhole in the cage system and fine adjust the position of the pinhole in the plane.

◦ Four dedicated rods are used in the cage system to attach various kinds of components along the optical axis.
There are three types of cage system available. Two types uses dedicated rod of dia. 6mm. One of them is P30 mm corner arrangement (C30 series) and another one is P60 mm corner arrangement (C60 series).
In addition, the one uses a dedicated rod of dia. 4mm is available for P16 mm corner arrangement to miniaturize.
◦ The holder plate can slide through the rod (cage) in the direction of the optical axis. Even without using the stage, it can easily adjust focus on the lens and camera.

Weitere Informationen

Weitere Informationen
Name	Cage Two-axis Optic Holder
Gewicht	0.0300kgs
Guide	Please contact our Sales for methods to fix the cage system to other equipment and parts not included in the WEB catalog. For consultation of optical system using cage system please contact Sales.
Attention	If the rod is tightened too tightly or if the tightening force is greatly different depending on the location, the rod may not fit in other holders. Initially fix the rod lightly, after building the optical system, please tighten so that the force that fixes the rod is even in each holder. When configuring a large optical system or a long optical system, it may become distorted or become unstable due to vibration.
Primary material	Aluminum
Guide Rod Diameter (Spaceing between rod)	φ4mm (16x16mm)
Compatible Optics Diameter	φ12.7mm
Compatible Optics Thickness	1 - 7mm
Clear Aperture	φ10mm
Adjustment Range (X,Y)	φ1mm
Resolution	0.25mm/rotation
Installation	Slide from the end of rods

Auf Lager

SKU

C16-LHC-12.7

171,00 €

It is a holder that can place a pinhole in the cage system and fine adjust the position of the pinhole in the plane.