25.4-mm mirror mount, stainless steel high stability, front loading, 2 piezomotor actuators

MHX-25.4A-PDM

Higher moment of inertia to maximize stiffness and faster to reach thermal equilibrium characteristics are achieved by a hollow-frame design. Ideal for interference measurement or precision measurement.
Please check for an introduction video of the structure and features of MHX.

Weitere Informationen

Weitere Informationen
Name	25.4-mm mirror mount, stainless steel high stability, front loading, 2 piezomotor actuators
Gewicht	0.2400kgs
Attention	Cannot be mounted on M6 rod (RO). Use M4 or 8-32 UNC rods (ROC, RO-UU) when mounting a rod. It can be fixed to the post stand (PST) or the spacer with M4 tapped holes with M4 screws. The reflecting surface of the mirror is located 4 mm deep from the front of the holder. There are 11mm offsets from the M4 screw fixing position. When using a rod, it is not possible to change the beam transmission direction of the mirror holder. Use a post stand (PST) to change the direction. When used with a cross beam (optical system such as a Michelson interferometer), the effective diameter of the beam becomes smaller.
Optic Loading Side	Front Loading
Angle Range	±3°
Material	Stainless Steel
Number of Control Axes	2 points
Optic Diameter	φ25.4mm
Mount Material	Stainless Steel
Compatible Optics Diameter	25, 25.4mm
Compatible Optics Thickness	3 - 6mm
Mirror Loading	Front
Mirror Clamping Mechanism	Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
Recommended Mirror Clamping Torque	0.07+/-0.01 Nm (10+/-2 oz.-in.)
Number of Adjustment Axes	2 points
Angular Travel Range	+/-3Deg.
Adjuster Thread	M6 x 0.250mm
Standardized Adjustment Sensitivity (based on MIM of piezomotor actuator)	0.8 urad
Dowel Pin Keys	ɸ2mm Slot and Hole
Standard Mounting	Counterbored clearance hole for M4 / 8-32 screws
Center-Post Mounting	M4 and 8-32 threaded holes
Thermal Repeatability with a 10C Thermal Cycle	1.5 urad

Nicht lieferbar

SKU

MHX-25.4A-PDM

1.433,10 €

25.4-mm mirror mount, stainless steel high stability, front loading, 2 piezomotor actuators

Resources & Downloads